Wiki
Commands for license control
Table of Contents
17.1 copy license
Command: copy license <source-url> <destination-url>
Function: Install license to the controller.
Parameters:
Function: Install license to the controller.
Parameters:
-
<source-url>: source path of license file.
-
<destination-url>: the copied destination path of license file.
Command mode: Admin User Configuration Mode
Default: None.
Usage guide: Import the legal license file into the controller. The license file takes effect only after the controller reboots.
Example: Import the license file.
active500EM#copy license ftp://admin:admin@192.168.1.10/abc.lic abc.lic
17.2 show license
Command: show license
Function: Show the license file information installed on the controller.
Parameters: None.
Command mode: Admin User Configuration Mode
Default: None.
Usage guide: Controller shows the license and any information contained in the file.
Example: Show the copy license file installed on the controller.
Function: Show the license file information installed on the controller.
Parameters: None.
Command mode: Admin User Configuration Mode
Default: None.
Usage guide: Controller shows the license and any information contained in the file.
Example: Show the copy license file installed on the controller.
active500EM#show license License name: abc.lic License ap-count: 32 License module: none License total period: forever
| Parameters | Explanation |
| License name | Name of the license |
| License ap-count | The max number of managed APs this license supports |
| License module | The module this license supports |
| License total period | The valid period of the license |
17.3 show device information
Command: show device information
Function: Show the serial number and the MAC address of the controller.
Parameters: None.
Command mode: Admin User Configuration Mode
Default: None.
Usage guide: Show the serial number and the MAC address of the controller that is used to generate the license file.
Example: Show the serial number and the MAC address of the controller.
Function: Show the serial number and the MAC address of the controller.
Parameters: None.
Command mode: Admin User Configuration Mode
Default: None.
Usage guide: Show the serial number and the MAC address of the controller that is used to generate the license file.
Example: Show the serial number and the MAC address of the controller.
active500EM#show device information Controller serial number:abcd123456 Controller mac:f8-f7-d3-00-03-f0