Commands For Simple Redundancy Backup

22. Commands for simple redundancy backup

22.1 switch-redundancy


Command: Switch-redundancy master <ipaddr> backup <ipaddr> interval 10000000 no switch-redundancy
Function: Enable/disable simple redundancy backup functions and configure the local role, the peer IP, and redundancy.
Parameters:
master IP address
backup IP address
**Internal
Default: Wireless Global Mode
Command guide: Disable.
Usage guide: Enable this command on the two ACs that are redundant for each other.
Example: Enable simple redundancy backup function.

active500EM(config-wireless)# switch-redundancy master 192.168.1.1
backup 192.168.1.2

Return to the Controller Wireless CLI page.