6. Management Commands

get management and set management commands
This chapter describes commands that can be used to view and set management communication configurations.

6.1 Get management

Summary of get management commands:

Command Description
detail * Get all properties *
dhcp-status Display whether DHCP is enabled for the management interface
dhcpv6-status Display whether DHCPv6 is enabled for the management interface
interface Display the Interface for management communication
ip Display the IP address of the management interface
ipv6 Display the IPV6 address of the management interface
ipv6-autoconfig-status Display whether IPV6 Address auto-configuration is enabled for the management interface
ipv6-prefix-length Display the IPV6 mask of the management interface
ipv6-status Display whether IPV6 Access is enabled for the management interface
mac Display the MAC address of the management interface
mask Display the IP mask of the management interface
static-ip Display the Static IP address of the management interface
static-ipv6 Display the Static IPV6 address of the management interface
static-ipv6-prefix-length Display the Prefix length of the static IPV6 address for management interface
static-mask Display the Static mask of the management interface
vlan-id Display the VLAN-ID of the management VLAN

6.1.1 get management detail

Function: Display all management details.
Command: get management detail
Example:

ARC2000MAP# get management detail
Property                    Value
----------------------------------------------------
vlan-id                     1
interface                   brvlan1
static-ip                   192.168.1.22
static-mask                 255.255.255.0
ip                          192.168.1.22
mask                        255.255.255.0
ipv6
ipv6-prefix-length          0
mac                         F8:F7:D3:00:26:10
dhcp-status                 down
dhcpv6-status               down
ipv6-status                 up
ipv6-autoconfig-status      up
static-ipv6
static-ipv6-prefix-length   0
autoconfig-link-local       fe80::438:75ff:fee6:4dd2
autoconfig-ipv6-global-all

6.1.2 get management dhcp-status

Function: Display whether DHCP is enabled for the management interface.
Command: get management dhcp-status
Example:

ARC2000MAP# get management dhcp-status
up

6.1.3 get management dhcpv6-status

Function: Display whether DHCPv6 is enabled for the management interface.
Command: get management dhcpv6-status
Example:

ARC2000MAP# get management dhcpv6-status
down

6.1.4 get management interface

Function: Display the interface for management communication.
Command: get management interface
Example:

ARC2000MAP# get management interface
brvlan1

6.1.5 get management ip

Function: Display the IP address of the management interface.
Command: get management ip
Example:

ARC2000MAP# get management ip
192.168.1.10

6.1.6 get management ipv6

Function: Display the IPV6 address of the management interface.
Command: get management ipv6
Example:

ARC2000MAP# get management ipv6
2010::12

6.1.7 get management ipv6-autoconfig-status

Function: Display whether IPV6 Address auto-configuration is enabled for the management interface.
Command: get management ipv6-autoconfig-status
Example:

ARC2000MAP# get management ipv6-autoconfig-status
up

6.1.8 get management ipv6-prefix-length

Function: Display the IPV6 mask of the management interface.
Command: get management ipv6-prefix-length
Example:

ARC2000MAP# get management ipv6-prefix-length
64

6.1.9 get management ipv6-status

Function: Display whether IPV6 Access is enabled for the management interface.
Command: get management ipv6-status
Example:

ARC2000MAP# get management ipv6-status
up

6.1.10 get management mac

Function: Display the MAC address of the management interface.
Command: get management mac
Example:

ARC2000MAP# get management mac
F8:F7:D3:00:03:80

6.1.11 get management mask

Function: Display the IP mask of the management interface.
Command: get management mask
Example:

ARC2000MAP# get management mask
255.255.255.0

6.1.12 get management static-ip

Function: Display the static IP address of the management interface.
Command: get management static-ip
Example:

ARC2000MAP# get management static-ip
192.168.1.10

6.1.13 get management static-ipv6

Function: Display the static IPV6 address of the management interface.
Command: get management static-ipv6
Example:

ARC2000MAP# get management static-ipv6
2012::15

6.1.14 get management static-ipv6-prefix-length

Function: Display the prefix length of the static IPV6 address for the management interface.
Command: get management static-ipv6-prefix-length
Example:

ARC2000MAP# get management static-ipv6-prefix-length
0

6.1.15 get management static-mask

Function: Display the static mask of the management interface.
Command: get management static-mask
Example:

ARC2000MAP# get management static-mask
255.255.255.0

6.1.16 get management vlan-id

Function: Display the VLAN-ID of the management VLAN.
Command: get management vlan-id
Example:

ARC2000MAP# get management vlan-id
1

 


6.2 Set management

Summary of set management commands:

Command Description
dhcp-status Set whether DHCP is enabled for the management interface
dhcpv6-status Set whether DHCPv6 is enabled for the management interface
ipv6-autoconfig-status Set whether IPV6 Address auto-configuration is enabled for the management interface
ipv6-status Set whether IPV6 Access is enabled for the management interface
static-ip Set the Static IP address of the management interface
static-ipv6 Set the Static IPV6 address of the management interface
static-ipv6-prefix-length Set the Prefix length of the static IPV6 address for management interface
static-mask Set the Static mask of the management interface
vlan-id Set the VLAN-ID of the management VLAN

6.2.1 set management dhcp-status

Function: Set whether DHCP is enabled for the management interface. Valid values are ?up? or ?down?.
Command: set management dhcp-status
Example:

ARC2000MAP# set management dhcp-status down

6.2.2 set management dhcpv6-status

Function: Set whether DHCPv6 is enabled for the management interface. Valid values are ?up? or ?down?.
Command: set management dhcpv6-status
Example:

ARC2000MAP# set management dhcpv6-status up

6.2.3 set management ipv6-autoconfig-status

Function: Set whether IPV6 Address auto-configuration is enabled for the management interface. Valid values are ?up? or ?down?.
Command: set management ipv6-autoconfig-status
Example:

ARC2000MAP# set management ipv6-autoconfig-status up

6.2.4 set management ipv6-status

Function: Set whether IPV6 Access is enabled for the management interface. Valid values are ?up? or ?down?.
Command: set management ipv6-status
Example:

ARC2000MAP# set management ipv6-status down

6.2.5 set management static-ip

Function: Set the static IP address of the management interface. Valid value is the IP address.
Command: set management static-ip
Example:

ARC2000MAP# set management static-ip 10.1.1.10

6.2.6 set management static-ipv6

Function: Set the static IPV6 address of the management interface. The valid value is the IPv6 address.
Command: set management static-ipv6
Example:

ARC2000MAP# set management static-ipv6 2011::10

6.2.7 set management static-ipv6-prefix-length

Function: Set the prefix length of the static IPV6 address for management interface. Valid value is the IPv6 address prefix length [0,128].
Command: set management static-ipv6-prefix-length
Example:

ARC2000MAP# set management static-ipv6-prefix-length 96

6.2.8 set management static-mask

Function: Set the static mask of the management interface. The valid value is the net mask.
Command: set management static-mask
Example:

ARC2000MAP# set management static-mask 255.255.255.0

6.2.9 set management vlan-id

Function: Set the VLAN-ID of the management VLAN. Valid values are [1,4094].
Command: set management vlan-id
Example:

ARC2000MAP# set management vlan-id 20

 


Return to AP Wireless CLI Table of Contents