16. NTP Commands

get ntp and set ntp commands
This chapter describes commands can be used to view and set the ntp settings.

16.1 get ntp

Summary of get ntp commands:

Command Description
detail * Get all properties *
interval Display the adjust time interval
server Display the NTP server
status Display the NTP status

16.1.1 get ntp detail

Function: Display all properties.
Command: get ntp detail
Example:

ARC2000MAP# get ntp detail
Property  Value
------------------
status    up
server    50.1.1.1
interval  200

16.1.2 get ntp interval

Function: Display the adjust time interval.
Command: get ntp interval
Example:

ARC2000MAP# get ntp interval
200

16.1.3 get ntp server

Function: Display the NTP server.
Command: get ntp server
Example:

ARC2000MAP# get ntp server
50.1.1.1

16.1.4 get ntp status

Function: Display the NTP status.
Command: get ntp status
Example:

ARC2000MAP# get ntp status
up

 


16.2 set ntp

Summary of set ntp commands:

Command Description
Interval Set the adjust time interval. Valid value: positive integer.
Server Set the NTP server. Valid value: IP address or blank.
Status Set the status. Valid values: ?up? or ?down?.

16.2.1 set ntp interval

Function: Set the adjust time interval. Valid value: positive integer.
Command: set ntp interval
Example:

ARC2000MAP# set ntp interval 200

16.2.2 set ntp server

Function: Set the NTP server. Valid value: IP address or blank.
Command: set ntp server
Example:

ARC2000MAP# set ntp server 50.1.1.1

16.2.3 set ntp status

Function: Set the status. Valid values: ?up? or ?down?.
Command: set ntp status
Example:

ARC2000MAP# set ntp status up

 


Return to AP Wireless CLI Table of Contents