12. Untagged VLAN Commands

12. Untagged VLAN Commands
- 12.1 get untagged-vlan
- 12.2 set untagged-vlan
  - 12.2.1 set untagged-vlan status
  - 12.2.2 set untagged-vlan vlan-id

get untagged-vlan and set untagged-vlan commands
This chapter describes commands that can be used to view and set the Untagged VLAN configuration.

12.1 get untagged-vlan

Summary of get untagged-vlan commands:

*Command*	*Description*
[Enter]	Display the untagged-vlan.
Status	Display the administrative status.
vlan-id	Display the VLAN ID to use for the untagged VLAN.

12.1.1 get untagged-vlan [Enter]

Function: Display the untagged-vlan.
Command: get untagged-vlan
Example:

ARC2000MAP# get untagged-vlan
Property  Value
---------------
vlan-id   1
status    up

12.1.2 get untagged-vlan status

Function: Display the administrative status.
Command: get untagged-vlan status
Example:

ARC2000MAP# get untagged-vlan status
up

12.1.3 get untagged-vlan vlan-id

Function: Display the VLAN ID to use for the untagged VLAN.
Command: get untagged-vlan vlan-id
Example:

ARC2000MAP# get untagged-vlan vlan-id
1

12.2 set untagged-vlan

Summary of set untagged-vlan commands:

*Command*	*Description*
Status	Set the administrative status.
vlan-id	Set the VLAN ID to use for the untagged VLAN. The valid value is an integer between 1 and 4094, or blank.

12.2.1 set untagged-vlan status

Function: Set the administrative status.
Command: set untagged-vlan status
Example:

ARC2000MAP# set untagged-vlan status down

12.2.2 set untagged-vlan vlan-id

Function: Set the VLAN ID to use for the untagged VLAN. The valid value is an integer between 1 and 4094, or blank.
Command: set untagged-vlan vlan-id
Example:

ARC2000MAP# set untagged-vlan vlan-id 2

Return to AP Wireless CLI Table of Contents

Table of Contents