ICCN’s WX7052-410G-XL is Layer 3 high-performance managed Ethernet switch with 48 ports of POE+ and 4 10G SFP+ uplinks. Advanced traffic control and security capabilities, as well as Layer 3, make this switch an ideal choice for your demanding core, distribution, or edge networking requirements. Though the advanced features and multiple 10G SFP+ performance characteristics make it ideal for high-density MDF or IDF environments, it also delivers high performance along with providing security, mobility, and flexibility capabilities for an intelligent wireless edge network.
Hardware
Ports:
- 48 10/100/1000Base-T
- 4 SFP+ 10G optical
- 1 Serial Port
LED Indicator:
- Power, PoE, port speed, port connection
Input voltage:
- 100V ~ 240V AC, 50 / 60Hz
Power consumption:
- 20W/50W
Operating temperature:
- 0 ℃ ~ 40 ℃
Storage temperature:
- -10 ℃ ~ 70 ℃
Relative humidity:
- 20% ~ 85% (non-condensing)
Cooling method:
- Four (4) fans
Dimensions:
- 17.3W x 13.7L x 1.6H (in)
Power-over-Ethernet (POE+)
Number of PoE ports:
- 48 10/100/1000Base-T ports
PoE Standard:
- IEEE802.af and IEEE802.at
Power budget:
- 960W (30W max per port)
Pin definition:
- V+ (RJ45 Pin 1,2), V- (RJ45 Pin 3,6)
PoE management:
- Port-based PoE Status displan and switch control
Performance features
Performance:
Wire-speed:
- 176Gbps / 130.94Mpps
MAC address table:
- 16K MAC
MAC address binding:
- Yes
MAC address filtering:
- Yes
MAC address learning control:
Supports port-based MAC address learning control
Jumbo frame:
- 16K
Port characteristics:
- Port control
- Port isolation
- Port loop detection
- Port mirroring: Yes mode
Port mirroring:
- Yes
VLAN:
- 4K 802.1q VLANs w/32 Interfaces
Link aggregation:
- 8 TRUNK groups, each supporting up to 8 ports
Flow control:
- IEEE 802.3x and back pressure
Bandwidth control:
- Smallest frame size: 64kbps.
Spanning Tree Protocol:
- IEEE 802.1d Spanning Tree Protocol (STP),
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multi-Process Spanning Tree Protocol (MSTP)
Ring protocol:
- EAPS
Multicast:
- 256 Layer 2 multicast table capacity and IGMP Snooping
Data control features
Layer 3 Aware Features
Static ARP:
- Yes
Static Routing:
- Yes
Three VLAN interfaces:
- Maximum 32 three-layer VLAN interface
Quality of service control:
- ACL: 256 groups of ACLs based on standard IP,
- extended IP, MAC IP, and ARP
Quality-of-Service
- 4 different priority queues per port
- Flexible queue scheduling algorithm:
- WRR, Q + WRR
- Port-based / MAC / 802.1p based /DSCP-based classification
Safety
Security features:
- MAC-based 802.1X authentication
- AAA / RADIUS authentication
- WEB / Telnet login password protection
- Access privilege mode password protection
- CPU protection
Layer 3 Routing
- Static and Dynamic ARP
- Static Routing
- Policy Routing
- RIP, OSPF, VRRP
- Up to 32 L3 VLAN Interfaces
Device Management & Environment
Management
Supports:
- CLI, Console, Telnet, Web
SNMP:
- SNMP v1 / v2 / v3.
User Management:
- Multi-user management
System log:
- Yes
Configure upload and download:
- Uploading / downloading configuration files via WEB or TFTP
Firmware upgrade:
- Supports via the WEB, TFTP or serial port to upgrade the firmware
Debugging
PING:
- Yes
TRACE ROUTE:
- Yes
Telnet client:
- Yes
Show process:
- Yes
Certifications & Safety
- FCC
- CE
- RoHS