Set Radio

Radio Commands

 
9.This chapter describes commands that can be used to view and set radio information.
9.2. set radio
Summary of set radio commands.

9.2.1. set radio a-mpdu
Function: Set enable/disable transmit AMPDU aggregation. Valid values: ?on? or ?off?.
Command: set radio a-mpdu
Example:

ARC2000MAP# set radio wlan0 a-mpdu off

9.2.2. set radio ap-detection
Function: Set whether AP detection is enabled. Valid values: ?on? or ?off?.
Command: set radio ap-detection
Example:

ARC2000MAP# set radio wlan0 ap-detection on

9.2.3. set radio beacon-interval
Function: Set beacon interval. Valid values: [40,2000].
Command: set radio beacon-interval
Example:

ARC2000MAP# set radio wlan0 beacon-interval 200

9.2.4. set radio channel-policy
Function: Set channel selection policy. Valid values: ?static?: use static-channel; ?best?: select the best channel.
Command: set radio channel-policy
Example:

ARC2000MAP# set radio wlan0 channel-policy static

9.2.5. set radio client-rssi-threshold
Function: Set client RSSI threshold. Valid value: [0,100].
Command: set radio client-rssi-threshold
Example:

ARC2000MAP# set radio wlan0 client-rssi-threshold 50

9.2.6. set radio dot11d
Function: Set whether 802.11d regulatory domain support is enabled. Valid values: ?up? or ?down?.
Command: set radio dot11d
Example:

ARC2000MAP# set radio wlan0 dot11d up

9.2.7. set radio dot11h
Function: Set whether 802.11h support is enabled. Valid values: ?on? or ?off?.
Command: set radio dot11h
Example:

ARC2000MAP# set radio wlan0 dot11h on

9.2.8. set radio dtim-period
Function: Set delivery traffic information map period. Valid values: [1,255].
Command: set radio dtim-period
Example:

ARC2000MAP# set radio wlan0 dtim-period 20

9.2.9. set radio fixed-multicast-rate
Function: Set fixed multicast rate for band. Valid values: ?auto?, ?a? mode, ?a-n? mode, ?n-only-a? mode: 6,9,12,18,24,36,48,54. Other mode: 1,2,5.5,6,9,11,12,18,24,36,48,54.
Command: set radio fixed-multicast-rate
Example:

ARC2000MAP# set radio wlan0 fixed-multicast-rate 24

9.2.10. set radio fragmentation-threshold
Function: Set the minimum packet size at which fragmentation is used. Valid values: [256,2346].
Command: set radio fragmentation-threshold
Example:

ARC2000MAP# set radio wlan0 fragmentation-threshold 2000

9.2.11. set radio legacy-buf-limit
Function: Set the percent in tx-queue for b/g client. Valid values: [0,100].
Command: set radio legacy-buf-limit
Example:

ARC2000MAP# set radio wlan0 legacy-buf-limit 30

9.2.12. set radio max-stations
Function: Set the maximum number of stations. Valid values: [0,256].
Command: set radio max-stations
Example:

ARC2000MAP# set radio wlan0 max-stations 100

9.2.13. set radio min-multicast-rate
Function: Set the mixed Multicast rate for band. Valid values: ?a? mode, ?a-n? mode, ?n-only-a?. Mode: 6,9,12,18,24,36,48,54. Other mode: 1,2,5.5,6,9,11,12,18,24,36,48,54.
Command: set radio min-multicast-rate
Example:

ARC2000MAP# set radio wlan0 min-multicast-rate 1

9.2.14. set radio mode
Function: Set the wireless mode. Valid values: wlan1:?a?,?a-n?,?n-only-a? and
wlan0:?b?,?g?,?bg?,?bg-n?,?n-only-g?.
Command: set radio mode
Example:

ARC2000MAP# set radio wlan0 mode n-only-g

9.2.15. set radio n-bandwidth
Function: Set the 802.11n channel bandwidth capacity (20/40). Valid values: ?20?,?40?,?20/40?.
Command: set radio n-bandwidth
Example:

ARC2000MAP# set radio wlan0 n-bandwidth 20/40

9.2.16. set radio n-primary-channel
Function: Set the 802.11n Primary channel location (upper/lower). Valid values: ?upper? or ?lower?.
Command: set radio n-primary-channel
Example:

ARC2000MAP# set radio wlan0 n-primary-channel upper

9.2.17. set radio protection
Function: Set the protection mode for ?g? and ?n? modes (auto/off). Valid values: ?auto? or ?off?.
Command: set radio protection
Example:

ARC2000MAP# set radio wlan0 protection auto

9.2.18. set radio rate-limit
Function: Set the broadcast/multicast rate limit (packets per second). Valid values: [1,50].
Command: set radio rate-limit
Example:

ARC2000MAP# set radio wlan0 rate-limit 50

9.2.19. set radio rate-limit-burst
Function: Set the broadcast/multicast rate limit burst (packets per second). Valid values: [1,75].
Command: set radio rate-limit-burst
Example:

ARC2000MAP# set radio wlan0 rate-limit-burst 70

9.2.20. set radio rate-limit-enable
Function: Set whether broadcast/multicast rate limiting is enabled. Valid values: ?on? or ?off?.
Command: set radio rate-limit-enable
Example:

ARC2000MAP# set radio wlan0 rate-limit-enable off

9.2.21. set radio rts-threshold
Function: Set the minimum packet size at which Request-To-Send is used. Valid values: [256,2346].
Command: set radio rts-threshold
Example:

ARC2000MAP# set radio wlan0 rts-threshold 300

9.2.22. set radio short-guard-interval-supported
Function: Enable 80211.n ?short guard interval? support? (no/yes). Valid values: ?yes? or ?no?.
Command: set radio short-guard-interval-supported
Example:

ARC2000MAP# set radio wlan0 short-guard-interval-supported yes

9.2.23. set radio spatial-stream
Function: Set the transmit and recevie chainmask values. Valid values: [1,2].
Command: set radio spatial-stream
Example:

ARC2000MAP# set radio wlan0 spatial-stream 1

9.2.24. set radio static-channel
Function: Set the channel to use when channel-policy is static. Valid values: Depends on system.country and radio.mode. All channels are positive integers.
Command: set radio static-channel
Example:

ARC2000MAP# set radio wlan0 static-channel 11

9.2.25. set radio station-isolation
Function: Set whether stations are isolated from each other. Valid values: ?on? or ?off?.
Command: set radio station-isolation
Example:

ARC2000MAP# set radio wlan0 station-isolation on

9.2.26. set radio status
Function: Set the radio status.
Command: set radio status
Example:

ARC2000MAP# set radio wlan0 status down

9.2.27. set radio stbc-mode
Function: Set enable/disable Space Time Block Code (STBC) Mode (on/off). Valid values: ?on? or ?off?.
Command: set radio stbc-mode
Example:

ARC2000MAP# set radio wlan0 stbc-mode on

9.2.28. set radio tx-power
Function: Set transmit power. Valid values: a percentage: [1,100].
Command: set radio tx-power
Example:

ARC2000MAP# set radio wlan0 tx-power 90

 


Return to AP Wireless CLI Table of Contents