Table of Contents
get system and set system commands
This chapter describes commands that can be used to view and set system settings.
This chapter describes commands that can be used to view and set system settings.
3.1 get system
Summary of get system commands:
Command | Description |
---|---|
[Enter] | * Get common properties * |
altversion | Display the Firmware version |
apmode | Display the AP mode (fit/fat) |
base-mac | Display the Base MAC address |
base-mac-status | Display the Base MAC address status (on/off) |
country | Display the Country |
country-code-is-configurable | Display the Country Code is configurable indicator (on/off) |
detail | * Get all properties * |
device-type | Display the Device Type Number |
forty-mhz-supported-a | Country supports 40MHz bandwidth in 5 GHz band |
forty-mhz-supported-g | Country supports 40MHz bandwidth in 2.4 GHz band |
model | Display the Hardware model |
nmode-supported | Country supports n-mode |
protocol-version | Display the Protocol version |
serial-number | Display the Serial Number |
system-contact | Display the System Contact |
system-location | Display the System Location |
system-name | Display the System Name |
username | Display the Username for access to Web UI and CLI |
version | Display the Firmware version |
3.1.1 get system
Function: Display the system information of the AP.
Command: get system
Example:
Command: get system
Example:
ARC2000MAP# get system Property Value ------------------------------------------------------------ model ARC2000MAP, Indoor Dual Band Radio 802.11N version 2.0.10.18 altversion 2.0.10.8 protocol-version 2 base-mac f8:f7:d3:00:26:10 serial-number WL009910D923790132 system-name ICC system-contact 855.692.7211 system-location Riverside, California apmode fit
3.1.2 get system altversion
Function: Display the firmware version (Tips: the alter version of AP).
Command: get system altversion
Example:
Command: get system altversion
Example:
ARC2000MAP# get system altversion 2.0.10.15
3.1.3 get system apmode
Function: Display the AP mode (fit or fat).
Command: get system apmode
Example:
Command: get system apmode
Example:
ARC2000MAP# get system apmode fat
3.1.4 get system base-mac
Function: Display the base MAC address.
Command: get system base-mac
Example:
Command: get system base-mac
Example:
ARC2000MAP# get system base-mac f8:f7:d3:00:03:80
3.1.5 get system base-mac-status
Function: Display the base MAC address status (on/off).
Command: get system base-mac-status
Example:
Command: get system base-mac-status
Example:
ARC2000MAP# get system base-mac-status on
3.1.6 get system country
Function: Display the country (Tips: country code information).
Command: get system country
Example:
Command: get system country
Example:
ARC2000MAP# get system country US
3.1.7 get system country-code-is-configurable
Function: Display the country code is configurable indicator (on/off).
Command: get system country-code-is-configurable
Example:
Command: get system country-code-is-configurable
Example:
ARC2000MAP# get system country-code-is-configurable on
3.1.8 get system detail
Function: Display all system command details.
Command: get system detail
Example:
Command: get system detail
Example:
ARC2000MAP# get system detail Property Value ------------------------------------------------------------------------ username admin model ARC2000MAP, Indoor Dual Band Radio 802.11N version 2.0.10.18 altversion 2.0.10.8 protocol-version 2 country US nmode-supported Y forty-mhz-supported-g Y forty-mhz-supported-a Y base-mac f8:f7:d3:00:26:10 base-mac-status on serial-number WL009910D923790132 country-code-is-configurable on device-type 22 system-name ICC system-contact 855.692.7211 system-location Riverside, California band-plan lastboot success apmode fit
3.1.9 get system device-type
Function: Display the device Type Number.
Command: get system device-type
Example:
Command: get system device-type
Example:
ARC2000MAP# get system device-type 22
3.1.10 get system forty-mhz-supported-a
Function: Country supports 40MHz bandwidth in 5 GHz band (Tips: 5G mode support 40MHz).
Command: get system forty-mhz-supported-a
Example:
Command: get system forty-mhz-supported-a
Example:
ARC2000MAP# get system forty-mhz-supported-a Y
3.1.11 get system forty-mhz-supported-g
Function: Country supports 40MHz bandwidth in 2.4 GHz band (Tips: 2.4G mode support 40MHz).
Command: get system forty-mhz-supported-g
Example:
Command: get system forty-mhz-supported-g
Example:
ARC2000MAP# get system forty-mhz-supported-g Y
3.1.12 get system model
Function: Display the hardware model.
Command: get system model
Example:
Command: get system model
Example:
ARC2000MAP# get system model ARC2000MAP, Indoor Dual Band Radio 802.11N
3.1.13 get system nmode-supported
Function: Country supports n-mode (Tips: AP support 802.11n protocol).
Command: get system nmode-supported
Example:
Command: get system nmode-supported
Example:
ARC2000MAP# get system nmode-supported Y
3.1.14 get system protocol-version
Function: Display the protocol version.
Command: get system protocol-version
Example:
Command: get system protocol-version
Example:
ARC2000MAP# get system protocol-version 2
3.1.15 get system serial-number
Function: Display the serial number.
Command: get system serial-number
Example:
Command: get system serial-number
Example:
ARC2000MAP# get system serial-number WL009910D923790132
3.1.16 get system system-contact
Function: Display the system contact.
Command: get system system-contact
Example:
Command: get system system-contact
Example:
ARC2000MAP# get system system-contact 855.692.7211
3.1.17 get system system-location
Function: Display the system location.
Command: get system system-location
Example:
Command: get system system-location
Example:
ARC2000MAP# get system system-location Riverside, California
3.1.18 get system system-name
Function: Display the system name.
Command: get system system-name
Example:
Command: get system system-name
Example:
ARC2000MAP# get system system-name ICC
3.1.19 get system username
Function: Display the username used to access the Web User Interface (UI) and CLI.
Command: get system username
Example:
Command: get system username
Example:
ARC2000MAP# get system username admin
3.1.20 get system version
Function: Display the current firmware version of AP.
Command: get system version
Example:
Command: get system version
Example:
ARC2000MAP# get system version 2.0.10.16
3.2 set system
Summary of set system commands:
Command | Description |
---|---|
apmode | Set the apmode (fit/fat) |
country | Set the Country code |
password | Set the Password for access to Web UI and CLI |
system-contact | Set the System Contact |
system-location | Set the System Location |
system-name | Set the System Name |
username | Set the Username for access to Web UI and CLI |
3.2.1 set system apmode
Function: Set the AP mode as ?fit? or ?fat?.
Command: set system apmode
Example:
Command: set system apmode
Example:
ARC2000MAP# set system apmode fat
3.2.2 set system country
Function: Set the country code. Valid length is two characters (i.e. ?US?).
Command: set system country
Example:
Command: set system country
Example:
ARC2000MAP# set system country US
3.2.3 set system password
Function: Set the password for access to the Web UI and CLI. The valid length is an alphanumeric string up to 8 characters.
Command: set system password
Example:
Command: set system password
Example:
ARC2000MAP# set system password 111
3.2.4 set system system-contact
Function: Set the system contact. The valid length is less than 256 characters.
Command: set system system-contact
Example:
Command: set system system-contact
Example:
ARC2000MAP# set system system-contact 855.692.7211
3.2.5 set system system-location
Function: Set the system location. The valid length is less than 256 characters.
Command: set system system-location
Example:
Command: set system system-location
Example:
ARC2000MAP# set system system-location "Riverside, California"
3.2.6 set system system-name
Function: Set the system name. The valid length is less than 64 characters.
Command: set system system-name
Example:
Command: set system system-name
Example:
ARC2000MAP# set system system-name ATT
3.2.7 set system username
Function: Set the username. The valid length is at least one character.
Command: set system username
Example:
Command: set system username
Example:
ARC2000MAP# set system username admin
Return to AP Wireless CLI Table of Contents