Table of Contents
get vap and set vap commands
This chapter describes commands that can be used to view and set vap information.
NOTE: Results (if any) for ?get vap? commands show both radios (wlan0 & wlan1) for each VAP (Virtual Access Point).
?Set vap? commands change BOTH radios (wlan0 & wlan1) for each VAP (Virtual Access Point). Do not use ?set vap? if you want different values for each radio (e.g., ?set vap description?). Individual radio settings can be set on the GUI interface.
This chapter describes commands that can be used to view and set vap information.
NOTE: Results (if any) for ?get vap? commands show both radios (wlan0 & wlan1) for each VAP (Virtual Access Point).
?Set vap? commands change BOTH radios (wlan0 & wlan1) for each VAP (Virtual Access Point). Do not use ?set vap? if you want different values for each radio (e.g., ?set vap description?). Individual radio settings can be set on the GUI interface.
8.1 get vap
Summary of get vap commands.
NOTE: Results (if any) for ?get vap? commands show both radios (wlan0 & wlan1) for each VAP (Virtual Access Point).
NOTE: Results (if any) for ?get vap? commands show both radios (wlan0 & wlan1) for each VAP (Virtual Access Point).
Command | Description | |
---|---|---|
all/ vap0~15 | def-acl-down | Display Default ACL Down |
def-acl-up | Display Default ACL Up | |
def-acltype-down | Display Default ACL Type Down (none/ipv4, Currently Unsupported: iv6/mac) | |
def-acltype-up | Display Default ACL Type Up (none/ipv4, Currently Unsupported ipv6/mac) | |
def-bwmax-down | Display Default BandWidth Max Down (0-4294967295) | |
def-bwmax-down-vaplimit | Display VAP BandWidth Max Down (0-4294967295) | |
def-bwmax-up | Display Default BandWidth Max Up (0-4294967295) | |
def-bwmax-up-vaplimit | Display VAP BandWidth Max Up (0-4294967295) | |
def-policy-down | Display Default Policy Down | |
def-policy-up | Display Default Policy Up | |
description | Display description | |
detail | * Get all properties * | |
name | Display the name of the instance only | |
qos-mode | Display QoS Admin Mode (up/down) | |
radio | Display the Radio to run VAP over | |
redirect-mode | Display the Redirect Mode | |
redirect-url | Display the HTTP URL to redirect to | |
vap-isolation | Display VAP ISOLATION | |
vlan-id | Display the VLAN ID |
8.1.1 get vap def-acl-down
Function: Display default ACL down.
Command: get vap def-acl-down
Example:
Command: get vap def-acl-down
Example:
ARC2000MAP# get vap vap0 def-acl-down
8.1.2 get vap def-acl-up
Function: Display default ACL Up.
Command: get vap def-acl-up
Example:
Command: get vap def-acl-up
Example:
ARC2000MAP# get vap vap0 def-acl-up
8.1.3 get vap def-acltype-down
Function: Display default ACL Type Down (none/ipv4, Currently Unsupported: ipv6/mac).
Command: get vap def-acltype-down
Example:
Command: get vap def-acltype-down
Example:
ARC2000MAP# get vap vap0 def-acltype-down def-acltype-down ---------------- none none
8.1.4 get vap def-acltype-up
Function: Display default ACL Type Up (none/ipv4, Currently Unsupported:ipv6/mac).
Command: get vap def-acltype-up
Example:
Command: get vap def-acltype-up
Example:
ARC2000MAP# get vap vap0 def-acltype-up def-acltype-up -------------- none none
8.1.5 get vap def-bwmax-down
Function: Display default BandWidth Max Down (0-4294967295).
Command: get vap def-bwmax-down
Example:
Command: get vap def-bwmax-down
Example:
ARC2000MAP# get vap vap0 def-bwmax-down def-bwmax-down -------------- 0
8.1.6 get vap def-bwmax-down-vaplimit
Function: Display VAP BandWidth Max Down (0-4294967295).
Command: get vap def-bwmax-down-vaplimit
Example:
Command: get vap def-bwmax-down-vaplimit
Example:
ARC2000MAP# get vap vap0 def-bwmax-down-vaplimit def-bwmax-down-vaplimit ----------------------- 0
8.1.7 get vap def-bwmax-up
Function: Display default BandWidth Max Up (0-4294967295).
Command: get vap def-bwmax-up
Example:
Command: get vap def-bwmax-up
Example:
ARC2000MAP# get vap vap0 def-bwmax-up def-bwmax-up ------------ 0
8.1.8 get vap def-bwmax-up-vaplimit
Function: Display VAP BandWidth Max Up (0-4294967295).
Command: get vap def-bwmax-up-vaplimit
Example:
Command: get vap def-bwmax-up-vaplimit
Example:
ARC2000MAP# get vap vap0 def-bwmax-up-vaplimit def-bwmax-up-vaplimit --------------------- 0
8.1.9 get vap def-policy-down
Function: Display default Policy Down.
Command: get vap def-policy-down
Example:
Command: get vap def-policy-down
Example:
ARC2000MAP# get vap vap0 def-policy-down
8.1.10 get vap def-policy-up
Function: Display default Policy Up.
Command: get vap def-policy-up
Example:
Command: get vap def-policy-up
Example:
ARC2000MAP# get vap vap0 def-policy-up
8.1.11 get vap description
Function: Display the description.
Command: get vap description
Example:
Command: get vap description
Example:
ARC2000MAP# get vap vap0 description description -------------------------------- Virtual Access Point 0 Virtual Access Point 0 - Radio 2
8.1.12 get vap detail
Function: Display all details.
Command: get vap detail
Example:
Command: get vap detail
Example:
ARC2000MAP# get vap vap0 detail Property Value --------------------------------------------------------- radio wlan0 status up vlan-id 1 vap-isolation off description Virtual Access Point 0 redirect-mode none redirect-url qos-mode down def-bwmax-up-vaplimit 0 def-bwmax-down-vaplimit 0 def-bwmax-up 0 def-bwmax-down 0 def-acltype-up none def-acltype-down none def-acl-up def-acl-down def-policy-up def-policy-down Property Value --------------------------------------------------------- radio wlan1 status up vlan-id 1 vap-isolation off description Virtual Access Point 0 - Radio 2 redirect-mode none redirect-url qos-mode down def-bwmax-up-vaplimit 0 def-bwmax-down-vaplimit 0 def-bwmax-up 0 def-bwmax-down 0 def-acltype-up none def-acltype-down none def-acl-up def-acl-down def-policy-up def-policy-down
8.1.13 get vap name
Function: Display the name of the instance only.
Command: get vap name
Example:
Command: get vap name
Example:
ARC2000MAP# get vap vap0 name name ---- vap0 vap0
8.1.14 get vap qos-mode
Function: Display QoS Admin Mode (up/down).
Command: get vap qos-mode
Example:
Command: get vap qos-mode
Example:
ARC2000MAP# get vap vap0 qos-mode qos-mode -------- down down
8.1.15 get vap radio
Function: Display the radio to run VAP over.
Command: get vap radio
Example:
Command: get vap radio
Example:
ARC2000MAP# get vap vap0 radio radio ----- wlan0 wlan1
8.1.16 get vap redirect-mode
Function: Display the redirect mode.
Command: get vap redirect-mode
Example:
Command: get vap redirect-mode
Example:
ARC2000MAP# get vap vap0 redirect-mode redirect-mode ------------- none none
8.1.17 get vap redirect-url
Function: Display the HTTP URL to redirect to.
Command: get vap redirect-url
Example:
Command: get vap redirect-url
Example:
ARC2000MAP# get vap vap0 redirect-url
8.1.18 get vap vap-isolation
Function: Display VAP ISOLATION.
Command: get vap vap-isolation
Example:
Command: get vap vap-isolation
Example:
ARC2000MAP# get vap vap0 vap-isolation vap-isolation ------------- off off
8.1.19 get vap vlan-id
Function: Display the VLAN ID.
Command: get vap vlan-id
Example:
Command: get vap vlan-id
Example:
ARC2000MAP# get vap vap0 vlan-id vlan-id ------- 1 1
8.2 set vap
Summary of set vap commands.
Note: ?Set vap? commands change BOTH radios (wlan0 & wlan1) for each VAP (Virtual Access Point). Do not use ?set vap? if you want different values for each radio (e.g., ?set vap description?). Individual radio settings can be set on the GUI interface.
Note: ?Set vap? commands change BOTH radios (wlan0 & wlan1) for each VAP (Virtual Access Point). Do not use ?set vap? if you want different values for each radio (e.g., ?set vap description?). Individual radio settings can be set on the GUI interface.
Command | Description | |
---|---|---|
all/ vap0~15 | def-acl-down | Set the Default ACL Down |
def-acl-up | Set the Default ACL Up | |
def-acltype-down | Set the Default ACL Type Down (none/ipv4, Currently Unsupported: ipv6/mac) | |
def-acltype-up | Set the Default ACL Type Up (none/ipv4, Currently Unsupported:ipv6/mac) | |
def-bwmax-down | Set the Default BandWidth Max Down (0-4294967295) | |
def-bwmax-down-vaplimit | Set the VAP BandWidth Max Down (0-4294967295) | |
def-bwmax-up | Set the Default BandWidth Max Up (0-4294967295) | |
def-bwmax-up-vaplimit | Set the VAP BandWidth Max Up (0-4294967295) | |
def-policy-down | Set the Default Policy Down | |
def-policy-up | Set the Default Policy Up | |
description | Set the description | |
qos-mode | Set the QoS Admin Mode (up/down) | |
redirect-mode | Set the Redirect Mode | |
redirect-url | Set the HTTP URL to redirect to | |
vap-isolation | Set the VAP ISOLATION | |
vlan-id | Set the VLAN ID |
8.2.1 set vap def-acl-down
Function: Set default ACL down.
Command: set vap def-acl-down
Example:
Command: set vap def-acl-down
Example:
ARC2000MAP# set vap vap0 def-acl-down
8.2.2 set vap def-acl-up
Function: Set default ACL Up.
Command: set vap def-acl-up
Example:
Command: set vap def-acl-up
Example:
ARC2000MAP# set vap vap0 def-acl-up
8.2.3 set vap def-acltype-down
Function: Set default ACL Type Down (none/ipv4, Currently Unsupported: ipv6/mac). Valid values: ?none? or ?ipv4?
Command: set vap def-acltype-down
Example:
Command: set vap def-acltype-down
Example:
ARC2000MAP# set vap vap0 def-acltype-down none
8.2.4 set vap def-acltype-up
Function: Set default ACL Type Up (none/ipv4, Currently Unsupported:ipv6/mac). Valid values: ?none? or ?ipv4?
Command: set vap def-acltype-up
Example:
Command: set vap def-acltype-up
Example:
ARC2000MAP# set vap vap0 def-acltype-up none
8.2.5 set vap def-bwmax-down
Function: Set default BandWidth Max Down Valid values: [0-4294967295].
Command: set vap def-bwmax-down
Example:
Command: set vap def-bwmax-down
Example:
ARC2000MAP# set vap vap0 def-bwmax-down 0
8.2.6 set vap def-bwmax-down-vaplimit
Function: Set VAP BandWidth Max Down Valid values: [0-4294967295].
Command: set vap def-bwmax-down-vaplimit
Example:
Command: set vap def-bwmax-down-vaplimit
Example:
ARC2000MAP# set vap vap0 def-bwmax-down-vaplimit 0
8.2.7 set vap def-bwmax-up
Function: Set default BandWidth Max Up Valid values: [0-4294967295].
Command: set vap def-bwmax-up
Example:
Command: set vap def-bwmax-up
Example:
ARC2000MAP# set vap vap0 def-bwmax-up 0
8.2.8 set vap def-bwmax-up-vaplimit
Function: Set VAP BandWidth Max Up Valid values: [0-4294967295].
Command: set vap def-bwmax-up-vaplimit
Example:
Command: set vap def-bwmax-up-vaplimit
Example:
ARC2000MAP# set vap vap0 def-bwmax-up-vaplimit 0
8.2.9 set vap def-policy-down
Function: Set default Policy Down.
Command: set vap def-policy-down
Example:
Command: set vap def-policy-down
Example:
ARC2000MAP# set vap vap0 def-policy-down
8.2.10 set vap def-policy-up
Function: Set default Policy Up.
Command: set vap def-policy-up
Example:
Command: set vap def-policy-up
Example:
ARC2000MAP# set vap vap0 def-policy-up
8.2.11 set vap description
Function: Set the description. Valid Value: an ascii string. NOTE: This will set both radios to the same description; use GUI interface to set each radio separately.
Command: set vap description
Example:
Command: set vap description
Example:
ARC2000MAP# set vap vap0 description "Virtual Access Point 0"
8.2.12 set vap qos-mode
Function: Set QoS Admin Mode Valid values: ?up? or ?down?.
Command: set vap qos-mode
Example:
Command: set vap qos-mode
Example:
ARC2000MAP# set vap vap0 qos-mode down
8.2.13 set vap redirect-mode
Function: Set the redirect mode. Valid values: ?none? or ?http?
Command: set vap redirect-mode
Example:
Command: set vap redirect-mode
Example:
ARC2000MAP# set vap vap0 redirect-mode none
8.2.14 set vap redirect-url
Function: Set the HTTP URL to redirect to. Valid value: url
Command: set vap redirect-url
Example:
Command: set vap redirect-url
Example:
ARC2000MAP# set vap vap0 redirect-url
8.2.15 set vap vap-isolation
Function: Set VAP ISOLATION. Valid value: ?on? or ?off?
Command: set vap vap-isolation
Example:
Command: set vap vap-isolation
Example:
ARC2000MAP# set vap vap0 vap-isolation off
8.2.16 set vap vlan-id
Function: Set the VLAN ID. Valid value: an integer between 1 and 4094
Command: set vap vlan-id
Example:
Command: set vap vlan-id
Example:
ARC2000MAP# set vap vap0 vlan-id 1
Return to AP Wireless CLI Table of Contents