Table of Contents
get vendor and set vendor commands
This chapter describes commands that can be used to view and set vendor settings.
This chapter describes commands that can be used to view and set vendor settings.
2.1 get vendor
Summary of get vendor commands:
Command | Description |
---|---|
[Enter] | * Get common properties * |
AP-name | Display the name of the AP |
default-password | Display the default password |
default-prompt | Display the default-prompt information |
default-ssid | Display the ssid |
default-usr | Display the default username |
delete | delete |
detail | * Get all properties * |
mib-dev-id | Display the mib-dev-id |
mib-vendor-id | Display the mib-vendor-id |
name-brief | Display the brief name |
name-en | Display the English name |
update-url | Display the update-url |
vendor-contact | Display the vendor contact information |
vendor-copyright | Display the vendor copyright information |
vendor-file-version | Display the vendor file-version information |
vendor-location | Display the vendor location information |
vendor-www | Display the vendor URL |
2.1.1 get vendor [enter]
Function: Display complete vendor information for the AP.
Command: get vendor
Example:
Command: get vendor
Example:
ARC2000MAP# get vendor Property Value ------------------------------------------------------------------------------------ AP-name ARC2000MAP name-en International Communications Corporation name-brief activeARC vendor-www http://att.com/activearc vendor-location 11801 Pierce St., Riverside, CA 92505 vendor-copyright Copyright (C) 2014 by International Communications Corporation vendor-contact 855 MYARC11 (855.692.7211) mib-vendor-id 1.3.6.1.4.1.41721 mib-dev-id 1.3.6.1.4.1.41721.2.1.11 vendor-file-version 10.6.134 default-prompt ARC2000MAP default-usr admin default-password admin default-ssid VAP-2G;VAP-5G update-url url delete 0
2.1.2 get vendor AP-name
Function: Display the name of the AP.
Command: get vendor AP-name
Example:
Command: get vendor AP-name
Example:
ARC2000MAP# get vendor AP-name ARC2000MAP
2.1.3 get vendor default-password
Function: Display the default password.
Command: get vendor default-password
Example:
Command: get vendor default-password
Example:
ARC2000MAP# get vendor default-password admin
2.1.4 get vendor default-prompt
Function: Display the default prompt information.
Command: get vendor default-prompt
Example:
Command: get vendor default-prompt
Example:
ARC2000MAP# get vendor default-prompt ARC2000MAP
2.1.5 get vendor default-ssid
Function: Display the ssid.
Command: get vendor default-ssid
Example:
Command: get vendor default-ssid
Example:
ARC2000MAP# get vendor default-ssid VAP-2G;VAP-5G
2.1.6 get vendor default-usr
Function: Display the default username.
Command: get vendor default-usr
Example:
Command: get vendor default-usr
Example:
ARC2000MAP# get vendor default-usr admin
2.1.7 get vendor delete
Function: Delete.
Command: get vendor delete
Example:
Command: get vendor delete
Example:
ARC2000MAP# get vendor delete 0
2.1.8 get vendor detail
Function: Display vendor information for the AP.
Command: get vendor detail
Example:
Command: get vendor detail
Example:
ARC2000MAP# get vendor detail Property Value --------------------------------------------------------- AP-name ARC2000MAP name-en International Communications Corporation name-brief activeARC vendor-www http://att.com/activearc vendor-location 11801 Pierce St., Riverside, CA 92505 vendor-contact 855 MYARC11 (855.692.7211) mib-vendor-id 1.3.6.1.4.1.41721 mib-dev-id 1.3.6.1.4.1.41721.2.1.11 default-prompt ARC2000MAP default-usr admin default-ssid VAP-2G;VAP-5G update-url url delete 0
2.1.9 get vendor mib-dev-id
Function: Display the mib-dev-id.
Command: get vendor mib-dev-id
Example:
Command: get vendor mib-dev-id
Example:
ARC2000MAP# get vendor mib-dev-id 1.3.6.1.4.1.41721.2.1.11
2.1.10 get vendor mib-vendor-id
Function: Display the mib-vendor-id.
Command: get vendor mib-vendor-id
Example:
Command: get vendor mib-vendor-id
Example:
ARC2000MAP# get vendor mib-vendor-id 1.3.6.1.4.1.41721
2.1.11 get vendor name-brief
Function: Display the brief name.
Command: get vendor name-brief
Example:
Command: get vendor name-brief
Example:
ARC2000MAP# get vendor name-brief AT&T activeARC?
2.1.12 get vendor name-en
Function: Display the English name.
Command: get vendor name-en
Example:
Command: get vendor name-en
Example:
ARC2000MAP# get vendor name-en International Communications Corporation
2.1.13 get vendor update-url
Function: Display the update URL.
Command: get vendor update-url
Example:
Command: get vendor update-url
Example:
ARC2000MAP# get vendor update-url url
2.1.14 get vendor vendor-contact
Function: Display the vendor contact information.
Command: get vendor vendor-contact
Example:
Command: get vendor vendor-contact
Example:
ARC2000MAP# get vendor vendor-contact 855.MYARC11 (855.692.7211)
2.1.15 get vendor vendor-copyright
Function: Display the vendor copyright information.
Command: get vendor vendor-copyright
Example:
Command: get vendor vendor-copyright
Example:
ARC2000MAP# get vendor vendor-copyright Copyright (C) 2013 International Communications Corporation
2.1.16 get vendor vendor-file-version
Function: Display the vendor file version.
Command: get vendor vendor-file-version
Example:
Command: get vendor vendor-file-version
Example:
ARC2000MAP# get vendor vendor-file-version 10.6.134
2.1.17 get vendor vendor-location
Function: Display the vendor location information.
Command: get vendor vendor-location
Example:
Command: get vendor vendor-location
Example:
ARC2000MAP# get vendor vendor-location 11801 Pierce St., Riverside CA 92505
2.1.18 get vendor vendor-www
Function: Display the vendor URL.
Command: get vendor vendor-www
Example:
Command: get vendor vendor-www
Example:
ARC2000MAP# get vendor vendor-www https://att.com/activearc
2.2 set vendor
Summary of set vendor commands:
Command | Description |
---|---|
delete | Delete vendor if set to 1 |
update-url | Set the URL of the new vendor |
2.2.1 set vendor delete
Function: Delete vendor if set to 1.
Command: set vendor delete
Example:
Command: set vendor delete
Example:
ARC2000MAP# set vendor delete 1 vendor.cfg has been deleted , please execute factory-reset to make the operation effect Notes : You should execute factory-reset to delete vendor -----------------------------------
2.2.2 set vendor update-url
Function: Set the URL of the new vendor.
Command: set vendor update-url
Example:
Command: set vendor update-url
Example:
ARC2000MAP# set vendor update-url tftp://1.1.1.100/ vendor.cfg ARC2000MAP# Note: please execute factory-reset to make vendor effect
Return to AP Wireless CLI Table of Contents